STRONG AIR FLOW

A belt driven drive package (12.5Hp indoor and above) offer flexibility on various air flow rate and various static pressure application. Design with high external static pressure to make sure the air distribution is even to every corner with long ducting application. Flexible changing the external static pressure and air flow by adjusting the 3 fan speed (8.0 ~ 10.0 hp) or changing the pulley size (12.5 ~ 60.0 hp) provide more flexibility in installation and produce optimum cooling and comfort.

PART LOAD WITH MULTI CIRCUIT DESIGN

The unit has single (8.0 ~ 15.0 hp) and multiple hermetic scroll compressors (20.0 ~ 60.0 hp) with independent refrigerant circuit. Each refrigerant circuit consists of a high efficiency compressor and condenser. With this modular system configuration combining with microprocessor controller allows the units to operate under partial load condition to meet the cooling capacity demand. No total shut down when servicing or repairing a faulty compressor or outdoor units.

FLEXIBLE APPLICATION & INSTALLATION

The indoor and outdoor unit allows you to choose the air discharge direction for either horizontal or vertical air discharge application (Optional). This package is optional and need to confirm before do the ordering.

HIGH QUALITY CASING

The indoor casing is constructed with powder coated electro galvanized mild steel sheet and insulated with 1/2” (13mm) thick 24kg/m3 PE foam (8.0 ~ 15.0hp) or 1” (25mm) thick double skin panel injected with polyure-thane foam (PU) insulation with “K” value of 0.02Watt/°C

HIGH EFFICIENCY HEAT EXCHANGER

Each coil consist of staggered row of 3/8” OD seamless copper tubes, mechanically
expanded into die-formed aluminum fins. The evaporator coil come standard with hydrophilic coated fin to ensure optimum system effectiveness and durability. The condenser coil provided with integral sub-cooling circuit to maximize energy efficiency and promote superior match-system operating performance when connected to suitable sized DX Evaporator-Blower unit. Coils are leak and pressure tested to 450psig while storage pressure is keep at 100 Psig.

AIR FILTER

The Indoor unit come with washable synthetic fibre air filter. Designed with easy withdrawal and renewal of filter cells. HEPA, AAF and many type of air filter can be requested to meet the requirement and building application.

SAFETY FEATURES

Built in internal overload protection for compressor. All outdoor units are equipped with auto reset high pressure and low pressure cut-out to protect against compressor damage due to high head pressure and system leakage respectively.

HIGH PERFORMANCE SCROLL COMPRESSOR

Adopting very famous brand with a special low noise, low vibration and high performance scroll compressor. Possesses a high Energy Efficiency Ratio (EER) delivering exceptional performance with a reduction in energy consumption. 100% gas cooler motor with internal line breaker or solid state motor protectors.

INTELLIGENT CONTROLLER

All the features can be easily set and change through microprocessor controller. It ensures comfortable cooling is delivered to the user with user friendly wired keypad controller. Wide range of control features including mode, temperature setting, timer, self diagnosis error code and etc.

STRONG AIR FLOW

Each coil consist of staggered row of 3/8” OD seamless copper tubes, mechanically expanded into die-formed aluminum fins.The evaporator coil come standard with hydrophilic coated fin to ensure optimum system effectiveness and durability.The condenser coil provided with integral sub-cooling circuit to maximize energy efficiency and promote superior match-system operating performance when connected to suitable sized DX Evaporator-Blower unit. Coils are leak and pressure tested to 450psig while storage pressure is keep at 100 Psig.

HIGH PERFORMANCE SCROLL COMPRESSOR

Adopting very famous brand with a special low noise, low vibration and high performance scroll compressor. Possesses a high Energy Efficiency Ratio (EER) delivering exceptional performance with a reduction in energy consumption. 100% gas cooler motor with internal line breaker or solid state motor protectors.

SLIM INDOOR DESIGN

The indoor casing is constructed with powder coated electro galvanized mild steel sheet and insulated with 1/2” (13mm) thick 24kg/m PE foam. Slim indoor design with body height 17.5” (440mm). The internal vents are easily accessible by removing the service panels.

HIGH QUALITY CASING

The indoor and outdoor casing is constructed with powder coated electro galvanized mild steel sheet and insulated with 1/2” (13mm) thick 24kg/m3 PE foam

SAFETY FEATURES

Built in internal overload protection for compressor. All outdoor units are equipped with auto reset high pressure and low pressure cut-out to protect against compressor damage due to high head pressure and system leakage respectively

AIR FILTER

The Indoor unit come washable synthetic fibre air filter. Designed with easy withdrawal and renewal of filter cells. HEPA,AAF and many type of air filter can be requested to meet the requirement and building application.

PART LOAD WITH MULTI CIRCUIT DESIGN

The unit has multiple hermetic scroll compressors with independent refrigerant circuit in single foaming condenser coil. Each refrigerant circuit consists of a high efficiency compressor and condenser. With this modular configuration combining with microprocessor controller allows the units to operate under partial load condition to meet the cooling capacity demand.

INTELLIGENT CONTROLLER (OPTIONAL)

All the features can be easily set and change through microprocessor controller. It ensures comfortable cooling is delivered to the user with user friendly wired keypad controller. Wide range of control features including mode, temperature setting, timer, self diagnosis error code and etc.